ขายมัลติมิเตอร์ Multimeter sanwa YX-361TR

มัลติมิเตอร์ Multimeter sanwa  YX-361TR แท้จากญี่ปุ่น(ราคาพิเศษ)

ใช้งานง่ายเหมาะสำหรับช่างที่ต้องการ Multimeter คุณภาพที่มีความแม่นยำในการวัดและทนทานในการใช้งาน

FEATURES

22-channel switch adopted. Total 35 ranges.
DCB zero-center-meter incorporated
Capacitance checker for capacitor ranging between 1F-1F.
A continuity check LED for optically-measuring incorporated.
Output terminal (series-connected capacitor terminal) attached
Measuring Terminals and Test leads with importance attached to their safety
Battery Test Range with built-in Actual Load Provided.

มัลติมิเตอร์ Multimeter sanwa Specifications

Meter sensitivity__ 44A
Range switch__ Manual
Accuracy guaranteed temperature & humidity range__ 232′c45-75% RH
Operating temperature humidity range__ 0-40′c, 80% RH Max. No condensation
Power supply__ R6 x 2, 6F22 x 1
Fuse__ 0.5A/250V (20mm)
Accessory__ Instruction manual, Test leads (TL-61), Spare fuse
Dimension__150 x 100 x 37 mm
Weight__ Approx. 290g

Function	Range	Accuracy	Input Resistance	Remarks
DCV	100m/500m/2.5/10/50/250/1000V 25kV (25kV by use of optional probe “HV-10″)	2.5% of max. scale(1000V or below)	20k	-
DCV(NULL)	5/25V	2.5% of max. scale	40k	Zero Centering Method
ACV	2.5/10/50/250/1000V 40Hz – 30kHz 3% 30Hz – 100kHz 1dB (10V or below)	3% of max. scale(Less than 10V range 4%	9k	-
DCA	50/2.5m/25m/0.25(50A range is common with DC 100mV range)	2.5% of max. scale	-	Terminal Voltage drop 250mV
RESISTANCE	2k/20k/200k/2M/20M Continuity indicating LED : X 1 range(Emitting light at 10 or less)	3% of scale length	-	Built-in battery 1.5V(SUM-3) X 2 9V(006P)X 1
dB	-10….+10dB(in AC2.5V range)….+62dB 0dB=0.775V(1mW) 600 impedance circuit	3% of max. scale (Less than 10V range 4%)	9k	-
BATT (Battery Test)	0 – 1.5V (BAD – ? – GOOD Color-coded scale)	5% of max. scale	-	Load Current : 0.25A
Li (Terminal to Terminal Current)	0 – 150A…..X 1k Range 0 – 1.5A…..X 100 Range 0 – 15mA…..X 10 Range 0 – 150mA…..X 1 Range	5% of scale length	-	Current flowing across terminals while object is measured.
Lv (Terminal to Terminal Voltage)	Common to each range 3V…..0V (Reverse of LI scale)	5% of scale length	-	Voltage applied across terminals while is measured.
hFE (DC Current Amplication Factor)	Transistor hFE : 0 – 1000 (in X 10 range)	3% of scale length	-	Optional hFE connector “HFE-5″ must be used.
FET and Semiconductor test	Judges quality of each model of FETs, SCR, Triac etc. with LI and LV values.	-	-